- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121A1-热刺激电流测...
-
121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验箱
-
海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫密度测试仪
-
海绵压陷硬度测试仪
-
海绵压缩蠕变测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵空气透气率测试仪
-
海绵往复冲击疲劳试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫缓冲能量试验机
-
落球回弹试验仪,介电击穿强度测定仪:2000-海绵拉伸撕裂试...
-
1000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:慢回弹泡沫复原时间测试仪
-
新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高工作电流值小工作电流经过多次实验发现仪(耐电弧焊接经过多次实验发现仪)-(估算机操纵)
High voltage low current tester (arc resistance tester) - (computer control)
新产产品名字大全称:耐电弧试验机
Product name: electric arc resistance tester
软件型號:NDH-A
Product model: NDH - A
能够满足标准的:GB/T 1411-2002《液态隔绝材料耐高压得很低直流电电弧焊接电池充电的实验设计》(就是指IEC 61621-1997)及ASTM D495等标的具有要求制定制造厂的,并具有IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
重点适用人群比率及用途:
本试验台机是明确使应用在变频电动机、电热器设备和家里用的电热器设备等该行业的高压电工用朔料制品、树酯胶和隔热层漆等隔热层的原原材料的耐焊弧耐磨性评定标准,主应用在液体隔热层的原原材料如:朔料制品、胶片、树酯、黑云母、工业陶瓷、玻璃板、隔热层油、隔热层漆、纸箱等材质的耐焊弧耐磨性软件测试;
本耐压测试仪由算起机操控自动运行,可以界面显示特定检测动态及检测期限,检测结尾后并保持特定检测统计资料,并可word打印.准则工作报告格式。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为上下两边一体机空间结构,下处为操作方法设计,顶部为检测箱。
2 本护肤品采用*新智力把控技艺,采用选用执行程序(IEC或ASTM)可自主去试验报告,并在电脑手机上上表示应力测试进程和结论。
3 **的性能健康,抗串扰效果强,考试精密较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧放电通断时候误差率:高于 ±10ms
2 调压器出水量:2kVA
3 额定功率疲劳试验电流值:12.5kV
4 检验直流电压精度等级:±3%
5 功率调整要求:±10% 感应电流精确测量误差:1.5%
6 金属电极对钢材拉伸试验各种压力:(0.5±0.05)N
7 参比电极材料:钨棒
8 参比电极距離:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 施用自然环境平均温度:(23±2)℃
10 选用条件绝对湿度:(50±5)%
11 电原:220V±5% 50Hz
12 做实验的时候 方案: 新国标/美标/10 mA 接连/20 mA 间断/30 mA反复/40 mA间断性
13 测试源程序给出:
| 程序代码段 | 电弧焊接交流电 mA | 焊弧通断耗时s | 各软件程序段持续不断時间s | 检测总时间段s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 反复通 | 60 | 240 | |
| 5 | 20 | 多次通 | 60 | 300 | |
| 6 | 30 | 连续式通 | 60 | 360 | |
| 7 | 40 | 间断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 编号 | 各称 | 数目 | 提示 |
| 01 | 耐弧光试验仪 | 一种 | |
| 02 | 参比电极体系 | 这套 | |
| 03 | 工业支架 | 每套 | |
| 04 | 电源模块低压电缆 | 五套 | |
| 05 | 接地极放** | 一只 | |
| 06 | 电压毫安表 | 几台 | |
| 07 | 新电脑测控app | 设计一套 | |
| 08 | 试板架 | 一只 | |
| 09 | 金属电极间距标准的块 | 2块 | |
| 10 | 方向规则块 | 2块 | |
| 11 | 瓷砖片 | 2片 | |
| 12 | 喷墨网页佳能打印 | 1台 | 名牌 |
| 13 | 算出机 | 1台 | 国际品牌 |
| 14 | 采用详细产品说明 | 1份 | |
| 15 | 合格品证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 货品形号:
NDH-A 耐电弧放电做实验的时候仪-微机有效控制
NDH-B 耐电弧放电现场实验仪-触控屏调控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!